Difference between revisions of "Translations:Fusion welding of optical fibres/10/en"

Latest revision as of 15:21, 7 June 2019

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Fusion welding of optical fibres)

Position the fibre in the fusion splicer by placing its end between the alignment of the electrodes and the edge of the V-slot, close the valve retaining the fibre.

Position the fibre in the fusion splicer by placing its end between the alignment of the electrodes and the edge of the V-slot, close the valve retaining the fibre.

TranslationPosition the fibre in the fusion splicer by placing its end between the alignment of the electrodes and the edge of the V-slot, close the valve retaining the fibre.

Position the fibre in the fusion splicer by placing its end between the alignment of the electrodes and the edge of the V-slot, close the valve retaining the fibre.

Revision as of 15:06, 7 June 2019 (view source) FuzzyBot (talk \| contribs) (Importation d’une nouvelle version depuis une source externe.)		Latest revision as of 15:21, 7 June 2019 (view source) FuzzyBot (talk \| contribs) (Importation d’une nouvelle version depuis une source externe.)
Line 1:		Line 1:
−	Position the fibre in the ~~welder machine~~ by placing its end between the alignment of the electrodes and the edge of the V-slot, close the valve retaining the fibre.	+	Position the fibre in the fusion splicer by placing its end between the alignment of the electrodes and the edge of the V-slot, close the valve retaining the fibre.