Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

• Photometric Measurement  + (The measurement of the optical power is read directly from the photometer. The value should generally be between -16 dBm and -24 dBm. After the measurement, connect the garter to the customer's box (or at the test OFB).)
• Photometric Measurement  + (The measurement of the optical power is read directly from the photometer. The value should generally be between -16 dBm and -24 dBm. After the measurement, connect the garter to the customer's box (or at the test OFB).)

• Photometric Measurement  + (After switching on the device, check and set the measuring wavelength to 1490 nm, the wavelength of the downlink flow, if necessary. Set the unit of measurement to dBm as stipulated in the operators' procedures.)
• Photometric Measurement  + (After switching on the device, check and set the measuring wavelength to 1490 nm, the wavelength of the downlink flow, if necessary. Set the unit of measurement to dBm as stipulated in the operators' procedures.)
• Soudure par fusion des fibres optiques  + (Positionner la fibre dans la rainure adaptée du guide fibre (250 ou 900 µm), la gaine 250 ou 900 µm à la graduation 10 en faisant attention que la partie dénuée prenne bien appui sur les 2 patins.)
• Visual location of defects on optical fiber  + (The visual defect locator (or optical penc … The visual defect locator (or optical pencil) emits red light at an output power of 10 mW. Do not directly look at the light beam or direct it at another person. Always replace the protective cap after use. Switch on the unit only when the protective cap is in place or a connector is attached to the outlet. or a connector is attached to the outlet.)
• Visual location of defects on optical fiber  + (Press the PWR button. The locator emits a continuous or pulsed signal depending on the setting selected with the MOD button.)
• Fusion welding of optical fibres  + (Position the fibre in the appropriate slot of the fibre guide (250 or 900 µm), the sheath 250 or 900 µm at scale 10, making sure that the devoid part rests firmly on the 2 pads.)
• Fusion welding of optical fibres  + (Tools required: fusion splicer, clipper, stripper, lint-free wipes, isopropyl alcohol and heat-shrinkable splice guards (smooves).)
• Changing the filter of a washing machine  + (<div></div>)
• Cleaning the agitator of a washing machine  + (Repositionnez l'agitateur sur l'arbre d'entraînement. Fixez-le avec le boulon que vous avez initialement retiré. Replacez le capuchon.)