Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

• Descale your Nespresso Pixie machine  + (To do that, wait until both buttons no longer blink. Once both buttons no longer blink and remain on, press them simultaneously for 3 seconds. The two buttons then start flashing more quickly: the descaling mode is activated.)
• Descale your Nespresso Pixie machine  + (To do that, wait until both buttons no longer blink. Once both buttons no longer blink and remain on, press them simultaneously for 3 seconds. The two buttons then start flashing more quickly: the descaling mode is activated.)

• Notching of sheet metal  + ( * Adjust the punch angle using the notching die * Click the ON key to start the machine )
• Descale your Nespresso Pixie machine  + (Before you start, remember to eject the capsule. Empty the capsule tray. Empty the drip tray as well.)
• Descale your Nespresso Pixie machine  + (Before you start, remember to eject the capsule. Empty the capsule tray. Empty the drip tray as well.)
• Fusion welding of optical fibres  + (Position the fibre in the appropriate slot of the fibre guide (250 or 900 µm), the sheath 250 or 900 µm at scale 10, making sure that the devoid part rests firmly on the 2 pads.)
• Détartrer sa machine à café Nespresso Pixie  + (Pour cela, attendez que les 2 boutons ne c … Pour cela, attendez que les 2 boutons ne clignotent plus. Une fois que les deux boutons ne clignotent plus et restent tous les deux allumés, appuyez dessus simultanément pendant 3 secondes. Les deux boutons se mettent alors à clignoter plus rapidement: le mode détartrage est activé.rapidement: le mode détartrage est activé.)
• Visual location of defects on optical fiber  + (Press the PWR button. The locator emits a continuous or pulsed signal depending on the setting selected with the MOD button.)
• Visual location of defects on optical fiber  + (The visual defect locator (or optical penc … The visual defect locator (or optical pencil) emits red light at an output power of 10 mW. Do not directly look at the light beam or direct it at another person. Always replace the protective cap after use. Switch on the unit only when the protective cap is in place or a connector is attached to the outlet. or a connector is attached to the outlet.)
• Fusion welding of optical fibres  + (Tools required: fusion splicer, clipper, stripper, lint-free wipes, isopropyl alcohol and heat-shrinkable splice guards (smooves).)